Steam Plant Operation, 10th Edition

DOWNLOAD NOW »

Author: Everett B. Woodruff,Herbert B. Lammers,Thomas F. Lammers

Publisher: McGraw Hill Professional

ISBN: 1259641341

Category: Technology & Engineering

Page: 752

View: 9134

The definitive reference on the role of steam in the production and operation of power plants for electric generation and industrial process applications For more than 80 years, Steam Plant Operation has been an unmatched source of information on steam power plants, including design, operation, and maintenance. The Tenth Edition emphasizes the importance of devising a comprehensive energy plan utilizing all economical sources of energy, including fossil fuels, nuclear power, and renewable energy sources. This trusted classic discusses the important role that steam plays in our power production and identifies the associated risks and potential problems of other energy sources. You will find concise explanations of key concepts, from fundamentals through design and operation. For energy students, Steam Plant Operation provides a solid introduction to steam power plant technology. This practical guide includes common power plant calculations such as plant heat rate, boiler efficiency, pump performance, combustion processes, and explains the systems necessary to control plant emissions. Numerous illustrations and clear presentation of the material will prove invaluable for those preparing for an operator’s license exam. Examples throughout show real-world application of the topics discussed. COVERAGE INCLUDES: • Steam and Its Importance • Boilers • Design and Construction of Boilers • Combustion of Fuels • Boiler Settings, Combustion Systems, and Auxiliary Equipment • Boiler Accessories • Operation and Maintenance of Boilers • Pumps • Steam Turbines, Condensers, and Cooling Towers • Operating and Maintaining Steam Turbines, Condensers, Cooling Towers, and Auxiliaries • Auxiliary Steam Plant Equipment • Environmental Control Systems • Waste-to-Energy Plants

Gasturbinen Handbuch

DOWNLOAD NOW »

Author: Meherwan P. Boyce

Publisher: Springer-Verlag

ISBN: 3642598412

Category: Science

Page: 593

View: 636

Dieses amerikanische Standardwerk wurde vom Übersetzer angepaßt auf die deutschen Verhältnisse. Es bietet wertvolle Informationen für Installation, Betrieb und Wartung, technische Details der Auslegung, Kennzahlen und vieles mehr.

Wärme- und Stoffübertragung

DOWNLOAD NOW »

Author: Hans Dieter Baehr,Karl Stephan

Publisher: Springer-Verlag

ISBN: 3662496771

Category: Science

Page: 808

View: 7259

Dieses bewährte Lehrbuch ist eine umfassende und gründliche Darstellung der Wärme- und Stoffübertragung. Ihre Theorie wird systematisch entwickelt, und die Lösungsmethoden aller wichtigen Probleme werden ausführlich behandelt. Alle Gebiete der Wärme- und Stoffübertragung werden dargestellt: Wärmeleitung und Diffusion, konvektiver Wärme- und Stoffaustausch, Wärmetransport beim Kondensieren und Verdampfen, Wärmestrahlung sowie die Berechnung der Wärme- und Stoffübertrager. Die 9. Auflage wurde auf den neusten Stand gebracht, so z.B. die Berechnungsgleichungen und auf Messungen basierende Korrelationen des Wärme- und Stoffübergangs oder die Stoffwerttabellen und das Literaturverzeichnis. Inhaltliche Ergänzungen betreffen vor allem die Kapitel über den Wärmeübergang bei erzwungener turbulenter Strömung, ebenso bei freier und Überlagerung von freier und erzwungener Strömung. Zudem enthalten viele Tabellen nur noch Orientierungswerte und wurden damit übersichtlicher gestaltet.

Der fliegende Zirkus der Physik

Fragen & Antworten

DOWNLOAD NOW »

Author: Jearl Walker

Publisher: Oldenbourg Verlag

ISBN: 9783486254785

Category:

Page: 193

View: 8946

Eine einzigartige Sammlung von Problemen und Fragen aus der physikalischen Alltagswelt. Teils lustig, teils tiefgründig wird über Blitz und Donner, Sanddünen und Seifenblasen, Sonnenbrillen und Wasserleitungen, Eier und Teetassen, Colaflaschen und Zucker berichtet. Unterhaltsamer lässt sich Physik nicht lernen!

Making Things Move

DOWNLOAD NOW »

Author: Dustyn Roberts

Publisher: O'Reilly Germany

ISBN: 3868991409

Category: Computers

Page: 360

View: 1853

In Making Things Move –Die Welt bewegen lernen Sie die Welt der Mechanik und Maschinen auf eine ganz neue und unterhaltsame Weise kennen. Verstehen Sie die Regeln und Gesetze der Mechanik durch nicht-technische Erklärungen, einleuchtende Beispiele und tolle Do-It-Yourself-Projekte: von beweglichen Kunstinstallationen über kreative Spielzeuge bis hin zu arbeitserleichternden Geräten. Zahlreiche Fotos, Illustrationen, Screenshots und 3-D-Modelle begleiten jedes Projekt. Making Things Move – Die Welt bewegen setzt bei den vorgestellten Do-It-Yourself-Projekten auf Standardteile aus dem Baumarkt, leicht beziehbaren Materialien über den Versandhandel und allgemeine Herstellungstechniken, die sich jeder leicht aneignen kann. Einfache Projekte zu Beginn des Buches verhelfen Ihnen zu soliden DIY-Kenntnissen, die in den komplexeren Projekten im weiteren Verlauf des Buches erneut zur Anwendung kommen. Ein Ausflug in die Welt der Elektronik am Ende des Buches führt Sie in die Funktions- und Steuerungsweise des Microcontrollers Arduino ein. Mit Making Things Move – Die Welt bewegen werden Ihre kreativen Ideen zur bewegten Wirklichkeit.

Flame Hardening

DOWNLOAD NOW »

Author: Hans Wilhelm Grönegress

Publisher: Springer Science & Business Media

ISBN: 3642867219

Category: Technology & Engineering

Page: 64

View: 3553

This book intended for shop use tries to familiarize the reader with the peculiari ties of a hardening method which due to its many advantages is now in use,many shops. A general knowledge of the principles of hardening and heat treating is presumed. Introduction 1. The name of the process. Flame hardening is a method derived from the old quench hardening and is used for the surface hardening of heat treatable steels. Flame hardening is so named in analogy to flame cutting as the use of a flame is a distinctive feature of this process as opposed to the use of a furnace. 2. Characteristics of flame hardening. In flame hardening the area to be 6 hardened is heated with a burner of large heat capacity (approx. 0.5 · 10 kcaljhr/ meter of flame lengths or 50,000 BTUfhr/inch of flame length) supplied with a mixture of fuel gas and oxygen. The hardening temperature is thus reached in so short a time at the surface that a heat jam is created, that is, more heat is supplied to the surface than can be dissipated to the interior of the workpiece. As the querr ehing takes place immediately after the heating the penetration of the heat to greater depth is prevented and only the outer layer subject to wear is hardened. The core of the workpiece remains unaffected by this heat treatment in cantrast to the other hardening methods where the entire piece is through heated in a furnace.

Lees' Loss Prevention in the Process Industries

Hazard Identification, Assessment and Control

DOWNLOAD NOW »

Author: Sam Mannan

Publisher: Butterworth-Heinemann

ISBN: 0750675551

Category: Business & Economics

Page: 3680

View: 6867

Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world's chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O'Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. - A must-have standard reference for chemical and process engineering safety professionals - The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety - Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field

Materials Selection in Mechanical Design: Das Original mit Übersetzungshilfen

Easy-Reading-Ausgabe

DOWNLOAD NOW »

Author: Michael F. Ashby

Publisher: Spektrum Akademischer Verlag

ISBN: 9783827417626

Category: Technology & Engineering

Page: 648

View: 426

Das englischsprachige, weltweit anerkannte Standardwerk zur Werkstoffauswahl - als neuer Buchtyp speziell für die Bedürfnisse deutschsprachiger Leser angepasst! Der Zusatznutzen, den dieses Buch bietet ist das Lesen und Lernen im englischen Original zu erleichtern und gleichzeitig in die spezielle Fachterminologie einzuführen und zwar durch: - Übersetzungshilfen in der Randspalte zur Fachterminologie und zu schwierigen normalsprachlichen Ausdrücken - Ein zweisprachiges Fachwörterbuch zum raschen Nachschlagen

Modelling and Control of Electric Power Plants

Proceedings of the IFAC Workshop, Como, Italy, 22-23 September 1983

DOWNLOAD NOW »

Author: C. Maffezzoni

Publisher: Elsevier

ISBN: 1483148637

Category: Technology & Engineering

Page: 176

View: 455

Modelling and Control of Electric Power Plants focuses on the modeling and simulation of thermal and nuclear units; the methods and technologies of advanced control systems that are applied in power stations; the design and analysis of man-machine systems; and the processes in power generation. Contained in the book are the literature of contributors who have done research on design and operation of electric power plants. The book begins with the development of models of electric power plants and nuclear power plants. Simulations, analysis, and studies are conducted to test the processes and controls that are instituted in the operations of these plants. Another part of the discussion focuses on the control mechanisms that are employed in plants. These computer control systems are deemed essential in the operations of these plants. The role that computers play in plants is noted, which is particularly observed in the operation of equipment, control of conditions, and application of operational processes in these areas. Some of the areas in which modeling is carried out include electric power plants, fossil fuel power plants, boilers, and coal plants. The discussions can be a source of information to those interested in the design, control, and operation of power plants.